16 Likes
Cool beans hope it gets added but post an irl picture if possible.
6 Likes
4 Likes
Also you suggested a normal FD but the blueprint shows an FD Spirit R Type B
4 Likes
Welp if they’re similar in physical looks it’s good enough. I would not harass him too much about his post. For now I would leave it.
6 Likes
Mazda RX-7 no closed please maybe a mazda rx 7 rotayry closed!!
3 Likes
RX-7 Newest FD3S Initual D
Keisuke’s FD3S
Kyoko’s FD3S
3 Likes
Initial D??
2 Likes
yes this car design by wu-huang chin a Same People was design a miata(90s) and etc.
the FD design is
- Both holes from the front bumper have hidden coolers.
- Hot air from the wheels through the side holes.
- Even the door handle is hidden on the window frame.
- and the las things it have a pop up headlights.
that is Why FD3s is most beautiful car on the 90s
“i just running in the 90s, is a new way I Like to Be”
refer to a set-up in which the engine uses one turbocharger since 1800RPM, and a second or both turbochargers at 4500RPM engine speeds. … Therefore, sequential turbocharger systems provide a way to decrease turbo lag without compromising power output at high RPM.
it will not have a turbo lag
becauseFD3s have a sequential turbocharger it less over lap sounds tones is
Not like everyone else On this world will like :
yes If the higher the RPM, it will more satisfied
2 Likes
RX-7 FD3S
Following one suggestion I saw for the FC3S figured i’d add something I once submitted on the suggestio channel in the server
another generation of car in the RX-7s and another car from the car anime/manga Initial D
Uses a rotary engine instead of traditional piston engine, vid of what they sound like
3 Likes
Yes, we need at least one RX-7 (before 1996)
3 Likes
Added this to a list of potential future additions 
6 Likes
frame to reduce body flex and torsion in such condition. By adding extra strength to the vehicle body, braking and cornering handling and stability increases.
| Engine | twin-turbocharged (sequentiallytwin-turbocharged) 1.3-liter Wankel |
|---|---|
| Horsepower | 276 HP @ 6,000 RPM |
| Torque | 217 LB-FT @ 5,000 RPM |
| 0-to-30 mph | 2.2 seconds |
| 0-to-60 mph | 5.1 seconds |
| Quarter Mile | 13.8 at 100 MPH |
| Top Speed | 160 MPH |
| Transmission | 5-speed manual |
| Front Suspension : Independent. Double Wishbones. coil springs. anti-roll bar | |
| Rear Suspension : Independent. Double Wishbones. anti-roll bar |
Dimensions
- LENGTH
169.1 in (4295 mm) - WIDTH
68.9 in (1750 mm) - HEIGHT
48.4 in (1229 mm) - FRONT/REAR TRACK
57.5/57.5 in (1,461/1,461 mm) - WHEELBASE
95.5 in (2426 mm) - GROUND CLEARANCE
5.3 in (135 mm) - CARGO VOLUME
5.7 cuFT (161 L)
2 Likes
TANK YOU
1 Like
We have officially done it!
2 Likes
Aged well
1 Like
Because this was added to the game, I’m gonna close it.